Baby design animal wallpaper
Reference: P7868The Baby design animal wallpaper features a charming and delightful graphic design, showcasing a variety of adorable animals in an enchanting illustration perfect for a baby's room. This non-woven wallpaper is manufactured in matt colors, ensuring a smooth and elegant finish. With a grammage of 180 grams per square meter and a durability of 10-15 years, this wallpaper is both long-lasting and easy to maintain. Applying the Baby design animal wallpaper is a simple process, requiring only glue, a roller, a brush, and a cutter. Once applied, it can be easily cleaned with a damp cloth and a little neutral soap. Additionally, it has an M2 reaction to fire certification, providing peace of mind for safety. When it's time for a change, the wallpaper can be effortlessly removed by wetting it with a sprayer. Each roll is 50 centimeters wide and is produced and shipped with care.
Why this product should be used for decoration
The Baby design animal wallpaper is the perfect choice for creating a whimsical and captivating atmosphere in any baby's room. Its charming animal illustrations and soft colors add a touch of sweetness and joy to the decor, making it an ideal backdrop for creating precious memories.
How to apply this product
Applying the Baby design animal wallpaper is a straightforward process that begins with preparing the wall and gathering the necessary tools. Start by applying glue to the wall or product, then carefully align the wallpaper and smooth it out with a roller. Trim any excess with a cutter and use a brush to remove any air bubbles. The end result will be a beautiful and enchanting space that captures the essence of childhood.
Thickness / weight: 150 g/m2
Finish: Matte (satin): non-glossy finish with vivid and elegant colors
Roll sizes:
1. 10 m x 50 cm
2. 3 m x 50 cm
100% customisable product: if you want to modify any element of the design, do not hesitate to contact us
Easily washable product: Can be gently cleaned with a damp cloth or non-abrasive sponge and water
Easy application (bubble-free): Glue directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
Rapport / case (product repeat): 50cm
100% recyclable product: made with eco-friendly inks
Application instructions are available on our website, and with the product, you will receive a QR code on the packaging that will direct you straight to them.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 48 hours to your home address available.