Cement stripes grey design office wallpaper
Reference: P5931Why this product should be used for decoration
Enhance the ambiance of your home office with our stunning Cement Stripes Office Wallpaper! This unique design combines the elegance of vertical stripes with the rugged texture of cement, creating a visually captivating aesthetic. Perfect for adding a touch of modernity to any space, this non-woven wallpaper is available in a range of matt colors that will effortlessly complement your existing decor. Transform your workspace into a stylish haven with this durable and versatile wallpaper!
How to apply this product
Applying our Cement Stripes Grey Design Home Office Wallpaper is a breeze! Simply use glue to adhere the wallpaper onto your wall or the product you desire. You can use a roller, brush, paintbrush, or cutter to apply it smoothly and evenly. Cleaning is easy too – just use a damp cloth and a small amount of neutral soap. With a grammage of 180 grams per square meter and a durability of 10-15 years, this wallpaper is designed to withstand the test of time. When it's time for a change, simply wet the wallpaper with a sprayer to easily remove it. Our wallpaper is produced in rolls that are 50 centimeters wide and comes with an M2 reaction to fire certification for added safety. Bring style and sophistication to your home office with our Cement Stripes Home Decoration Wallpaper today!
Thickness / weight: 150 g/m2
Finish: Matte (satin): non-glossy finish with vivid and elegant colors
Roll sizes:
1. 10 m x 50 cm
2. 3 m x 50 cm
100% customisable product: if you want to modify any element of the design, do not hesitate to contact us
Easily washable product: Can be gently cleaned with a damp cloth or non-abrasive sponge and water
Easy application (bubble-free): Glue directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
Rapport / case (product repeat): 50cm
100% recyclable product: made with eco-friendly inks
Application instructions are available on our website, and with the product, you will receive a QR code on the packaging that will direct you straight to them.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 48 hours to your home address available.