Cubical 3D orange pattern geometric wallpaper
Reference: P9146This captivating design features a cubical pattern that creates a visually engaging 3D effect. With a mix of orange and cream cubes set against a dark backdrop, it adds a distinctive touch reminiscent of modern aesthetics. Perfect for those seeking a dynamic and artistic flair.
The Cubical 3D orange pattern geometric wallpaper is a vibrant combination of modern design and geometric allure, featuring an eye-catching pattern of cubes in stunning orange hues. This wallpaper transforms any space into a lively and inviting environment, making it perfect for contemporary interiors.
Why this product should be used for decoration
Enhance your interior with the Cubical 3D orange pattern geometric wallpaper that elevates your decor to new heights! Its geometric cubes create a dynamic visual impact, inspiring creativity and liveliness in your home or office. Perfect for accent walls or entire rooms, this modern design breathes fresh air into your surroundings, inviting warmth and joy!
How to apply this product
Applying the Cubical 3D orange pattern geometric wallpaper is simple and enjoyable! Use glue along with essential tools like a roller, brush, and cutter for a seamless finish. With proper care, this wallpaper can easily be cleaned and maintained, ensuring your space stays vibrant for years to come!
Thickness / weight: 150 g/m2
Finish: Matte (satin): non-glossy finish with vivid and elegant colors
Roll sizes:
1. 10 m x 50 cm
2. 3 m x 50 cm
100% customisable product: if you want to modify any element of the design, do not hesitate to contact us
Easily washable product: Can be gently cleaned with a damp cloth or non-abrasive sponge and water
Easy application (bubble-free): Glue directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
Rapport / case (product repeat): 50cm
100% recyclable product: made with eco-friendly inks
Application instructions are available on our website, and with the product, you will receive a QR code on the packaging that will direct you straight to them.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 48 hours to your home address available.