Kids wallpaper leopard spot design
Reference: P12211Transform your child's room into a wild adventure with our Kids wallpaper leopard spot design. This enchanting design features playful leopard spots in a delightful array of matt colours, creating a vibrant and inviting atmosphere for your little ones. The non-woven material ensures durability while remaining soft to the touch, making it perfect for any playful environment. Easy to clean with a damp cloth and a little neutral soap, this wallpaper is not only beautiful but also practical for busy households!
Why this product should be used for decoration
The Kids wallpaper leopard spot design kids wallpaper is the ideal choice for parents looking to spark creativity and imagination in their children's spaces. This lively pattern adds a sense of adventure, encouraging kids to explore their surroundings and express themselves freely. With its stylish design and lasting quality, this wallpaper not only beautifies the room but also creates a cozy and inspiring environment for your little ones to grow and play!
How to apply this product
Applying the Kids wallpaper leopard spot design kids wallpaper is a breeze! Simply use glue to adhere it to the wall, employing tools such as a roller, brush, and cutter for a perfect finish. With its easy application process, you can quickly transform any room into a playful paradise!
Thickness / weight: 150 g/m2
Finish: Matte (satin): non-glossy finish with vivid and elegant colors
Roll sizes:
1. 10 m x 50 cm
2. 3 m x 50 cm
100% customisable product: if you want to modify any element of the design, do not hesitate to contact us
Easily washable product: Can be gently cleaned with a damp cloth or non-abrasive sponge and water
Easy application (bubble-free): Glue directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
Rapport / case (product repeat): 50cm
100% recyclable product: made with eco-friendly inks
Application instructions are available on our website, and with the product, you will receive a QR code on the packaging that will direct you straight to them.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 48 hours to your home address available.